Festo CPX-M-FB20 Manual page 43

1. Installation
1 2 3 4
A
1
Quickon screw
2
Clamping box
Fig. 1/9: Sealing a non-used power supply connection
Festo P.BE-CPX-FB20/21-EN en 1202a
Proceed as follows:
1. Place the clamping ring on the sealing rubber
(see Fig. 1/9, diagram B or Fig. 1/10, diagram B).
2. Place both together in the Quickon screw.
3. Place the appropriate splice ring in the non-required
connection of the power supply or of the fibre optical
waveguide in the Rugged Line plug.
4. Place the screw connector in position and tighten the
Quickon screw with the fibre cutter (see Fig. 1/9,
diagram C or Fig. 1/10, diagram C).
B
3
4
C
Sealing rubber
Splice ring
1-29