Festo CPX-M-FB20 Manual page 69

2. Commissioning
Insert description of slave In the following dialogue window you can describe the slave
Fig. 2/10: Dialogue window "Insert Device Description"
Festo P.BE-CPX-FB20/21-EN en 1202a
and enter specific information, e.g. station name and picture
of the slave.
6. Profile number:
The CPX terminal corresponds to the Interbus I/O profile
12 . Enter this value in the field "Profile Number".
H
7. Interface type:
Interface type "Universal" is preset. This setting can be
accepted. Alternatively, by actuating the "Interface Type"
button you can open a dialogue window in which you can
set the type "Remote bus".
2-25