Festo CPX-M-FB20 Manual page 68

2. Commissioning
ID code:
Process data channel:
2-24
Enter the appropriate Ident. code in accordance with the
table.
Configuration
2)
Only digital outputs
Only digital inputs, no diagnostics mode
(M2, M3 or M4) active
Digital inputs and outputs
1)
Decimal
2)
Valves and/or electric outputs
Tab. 2/6: ID code
Enter the number of inputs and/or outputs on the CPX
terminal, as ascertained in the section 2.1.1 under "Calculating
the number of inputs/outputs". Observe the following:
Note
– Round up the number of inputs and/or outputs to the
next word limit (16, 32, 48, 64, 80 or 96).
– If the number of input bits differs from the number of
output bits, the greater number is in each case decisive
for the entry of the process data channel bits .
2)
Festo P.BE-CPX-FB20/21-EN en 1202a
1)
Ident. code
1
D
2
D
3
D