Festo CPX-M-FB20 Manual page 81

2. Commissioning
Festo P.BE-CPX-FB20/21-EN en 1202a
Parameterisation processes
After Power ON, the CPX terminal can be parameterised via
the handheld.
Note
The last parameterisation received in the CPX terminal is
always valid.
The CPX terminal can only be parameterised if the system
parameter "System start" has the setting "System start with
default parametrisation and current CPX expansion".
In this case, the standard parameter settings are valid in the
CPX terminal after Power ON.
Note
If the system parameter "System start" has the setting
"System start with saved parametrisation and saved CPX
expansion", modified parameter settings in the CPX ter-
minal will become valid immediately after Power ON.
2-37