Festo CPX-M-FB20 Manual page 50

2. Commissioning
Electric modules
Analogue 2-off input module
Analogue 4-off input module
Analogue 4-off input module
Analogue 4-off input module
(temperature module)
Analogue 2-off output module
1)
Module identifiers on the handheld device, on I/O modules these are shown in the inspection
window.
Tab. 2/3: Overview of identifiers and addresses of the electric modules (part 2)
Pneumatic interfaces for
VTSA...
Pneumatic interface for
VTSA... valves (type 44/45)
with DIL switch setting:
– 1 ... 8 valve coils
– 1 ... 16 valve coils
– 1 ... 24 valve coils
– 1 ... 32 valve coils
1)
Module identifier in the Handheld.
2)
The number of output addresses occupied by the pneumatic modules of the VTSA... is set on the
pneumatic interface with a DIL switch (see manual for the CPX I/O modules).
Tab. 2/4: Overview of identifiers and addresses of pneumatic modules
2-6
Type
CPX-2AE-U-I
CPX-4AE-U-I
CPX-4AE-I
CPX-4AE-T
CPX-2AA-U-I
Type
VABA-10S6-x1
2)
The complete address range of the I/Os including diagnosis
always contains an equal number of inputs and outputs.
Tip:
Copy the following table for further calculations.
Module Assigned ad-
1)
identifier dresses
Inputs
2AI 32 I
4AI 64 I
4AI-I 64 I
4AI-T 32/64 I
2AO –
Module Assigned addresses
1)
identifier
Inputs
VTSA, –
ISO Plug In or
TYPE 44 or
TYPE 45
Festo P.BE-CPX-FB20/21-EN en 1202a
Outputs
–
–
–
2)
–
32 O
Outputs
8 O
16 O
24 O
32 O