Festo CPX-M-FB20 Manual page 31

1. Installation
A
1
Cable stripper "Kames 1" from Phoenix Contact
Fig. 1/5: Removing the outer cable insulation
Festo P.BE-CPX-FB20/21-EN en 1202a
Note
The two individual cores must not be damaged.
6. Use a sharp diagonal cutter to cut off the outer red cable
coating and the strain relief at the start of the cut area,
without damaging the two individual cores (see Fig. 1/5,
diagram D).
7. Shorten the individual cores by 12 cm, as this part may
have been damaged when the insulation was removed
with the cable cutter (see Fig. 1/5, diagram D).
1
B
D
C
1-17