Beechcraft C-12C Operator And Technical Reference Manual page 441

Figure 3C-33. Inserting Flight Plan Waypoints in
Sequence
Table 3C-24. Inserting Flight Plan Waypoints
in Sequence Procedure (Continued)
NO. DESCRIPTION/FUNCTION
1 Erase Flight Plan as described.
2 Enter first desired waypoint into the
scratchpad.
3 Insert waypoint.
4 Horizontal course into the first waypoint is
computed and displayed.
5 Successive waypoints may be inserted in
sequence. Numbers are automatically
assigned.
6 Scroll to insert additional waypoints, if
more than three.
7 Indicates end of flight plan marker.
Figure 3C-34. Inserting and Deleting Intermediate
Flight Plan Waypoints
Table 3C-25. Inserting and Deleting
Intermediate Flight Plan Waypoint Procedure
NO. DESCRIPTION/FUNCTION
1 Enter next desired waypoint into the
scratchpad.
2 Insert waypoint, moving BRL down in the
flight.
3 Enter a – in scratchpad to delete waypoint.
4 Delete waypoint, closing up the hole
created in the flight plan.
1 Inserting a new FROM waypoint.
Instead of waypoints moving down the list when
inserting a new FROM waypoint, the current FROM
waypoint moves up the list. An alphabetical suffix is
added based on the preceding waypoint, which was
the former FROM waypoint.
TM 1-1510-218-10
3C-87