Beechcraft C-12C Operator And Technical Reference Manual page 181

the sectorization is to show the frequency first,
followed by the identifier of the associated reference
point, followed next by the applicable radials, and,
finally, the associated altitude restrictions.
When an altitude restriction is shown on
the APT 4 page, the abbreviation BEL
means at and below the specified altitude.
The abbreviation ABV means at and above
the specified altitude.
KORL
APR
REF: KMCO
311
BEL 5500FT
Figure 3-24. APT 4 Page (BEL)
In a few cases, APR, DEP, CL B, CL C, TRSA,
CTA, and TMA frequencies are sectorized such that
the restriction cannot be displayed on a single page.
When this occurs, TEXT OF FREQUENCY USAGE
NOT DISPLAYED is displayed on the APT 4 page.
There are some airports in the database for which no
communications information is available. In this case,
COMM FREQ DATA NOT AVAIL is displayed.
(5) Airport 5 Page. The APT 5 page is used
to store and display user-entered remarks.
remarks might include information on lodging, dining,
airport services, etc. Up to 100 airports may contain
these remarks. A remark may contain up to 3 lines of
11 characters each. Letters, numbers, hyphens, and
spaces may be used in the remark.
1. Select the APT 5 page for the desired
airport.
2. Press the right CRSR button.
3. Rotate the right outer knob until the
cursor fills the entire third line of the
screen.
4. Use the right inner knob to select the
first character of the remark.
NOTE
121.10
o - 60 o
APT+4
5. Turn the right outer knob one step
6. Use the right outer and inner knobs to
7. Press the ENT button to approve the
8. Use the above procedure to select the
9. Press the right CRSR button to turn
(6) Airport 6 Page. The APT 6 page shows
aeronautical services available for the selected airport.
These services include customs, fuel, and oxygen
availability as well as an indicator of a landing fee.
(a) Customs Information. Refer to Table
3-9 for customs displays and their explanations.
Table 3-9. Customs Information
DISPLAY
Blank
CUSTMS–
These
ADCS
CUSTMS–
PR
CUSTMS–
REST
TM 1-1510-218-10
clockwise to move the flashing portion
of the cursor to the second cursor
position, then use the right inner knob
to select the second character.
select the rest of the first line of the
remark.
first line. The cursor will move to the
second line.
characters of the second and third
lines of the remark. Press the ENT
button to individually approve each
line of the remark.
the right cursor function off.
(Continued)
EXPLANATION
Blank line indicates
customs information
available in the database.
Customs are available
private aircraft arriving to the
U.S. from Canada or Mexico.
Advance notice of arrival to
customs officers is
included in the flight
transmitted to a FAA facility.
This code is used when this is
the only type customs facility
available.
Customs facilities are available,
but require prior request or
permission for use.
Customs facilities are available
on a restricted basis.
with airport before planning to
use.
that
is not
for
to be
plan
Check
3-27