Beechcraft C-12C Operator And Technical Reference Manual page 415

Table 3C-15. CDU Annunciations and Scratchpad Messages (Continued)
ANNUNCIATION / INITIATING CONDITION
SP MESSAGE
3. Following
APPROACH
approach
(continued)
annunciation or when
Flight
transitions
manually selected to
approach mode. HSI
deviations and RAIM
integrity performance
are set for approach.
APPROACH Attempt to:
DEFINED
1. Enter
parameter at the MAP
or
extension waypoint.
2. Delete the V attribute
at the MAP of an
approach
RWXND waypoint of a
visual approach.
3. Attach a Hold to an
Initial Approach Fix
(IAF) (with a data
base holding pattern),
MAP,
Approach
Point (MAHP) (with a
data
pattern).
4. Attach a pattern to an
IAF, (with a data base
holding
FAF/runway extension
point, MAP, or MAHP
(with
holding pattern).
5. Insert an offset when
approach waypoint is
the active waypoint
6. Enter
between
runway
point and MAP.
7. Perform a direct-to the
MAP.
RESET
MECHANISM
flashing
Ten
after initiation or
HSI
Mode
change
or
terminal,
route,
oceanic mode.
Clear key.
a VNAV
visual runway
or the
or Missed
Holding
base holding
pattern),
a data base
a waypoint
the FAF/
extension
LOCATION BLINKING
seconds A
deviations
to
en
or
SP
TM 1-1510-218-10
NOT CDU
CLEARABLE MSG
ALERT
B X
A
3C-61