Beechcraft C-12C Operator And Technical Reference Manual page 211

1:KELP
AQN4-
2.INK
3.PHILS
4.TQA
14:KDFW
FPL 0
Figure 3-73. SID/STAR Procedure
To help differentiate between approaches (no
adding or deleting waypoints) and SID and STAR
procedures (adding and deleting waypoints allowed),
the waypoint number has a period (.) next to it instead
of a blank space. The period also differentiates a SID
or STAR waypoint from a regular waypoint, which is
followed by a colon (:).
(1) Adding An Individual Waypoint In The
SID Or STAR Procedure.
1. Use the left knobs to select the FPL 0
page on the left side of the screen.
2. Turn the left cursor on by pressing the
left CRSR button.
outer knob as necessary to position
the cursor over the waypoint identifier
which will follow the waypoint being
added.
3. Use the left inner and outer knobs to
enter the new waypoint identifier.
4. Press the ENT button to display the
waypoint page for this identifier. If the
waypoint is correct, then press the
ENT button a second time to confirm
the waypoint page. The new waypoint
is added to the waypoints that make
up the SID or the STAR procedure.
(2) Deleting An Individual Waypoint In A SID
Or A STAR Procedure.
1. Use the left knobs to select the FPL 0
page on the left side of the screen.
2. Rotate the left outer knob to place the
cursor over the waypoint to be
deleted.
3. Press the CLR button.
DEL will appear to the left of the
STAR
ENR - LEG
Rotate the left
The letters
identifier and a question mark will
appear to the right of the identifier.
4. If this is the desired waypoint to
delete, then press the ENT button. If
it is not the desired waypoint, press
the CLR button.
Adding waypoints to or deleting waypoints
from SID or STAR procedures does not
change the way that they are stored in the
published database.
(3) Changing Or Deleting An Entire SID Or
STAR Procedure From The Active Flight Plan.
Any waypoints manually added to a SID or
STAR will be deleted if the SID or STAR is
changed or deleted using the following
procedure.
1. Use the left knobs to select the FPL 0
page on the left side of the screen.
2. Turn the left cursor on by pressing the
left CRSR button.
over the SID or STAR procedure
header by using the left outer knob.
3. With the cursor over the procedure
header, press the ENT button to
change the SID or STAR procedure or
press the CLR button and then the
ENT button to delete the entire
procedure.
bb. The Other Pages.
(1) Frequencies for Nearest Flight Service
Stations (Other 1).
database the locations of Flight Service Stations (FSS)
and their remote communications sites. In addition,
the KLN 90B determines which two of these FSS
points of communication are closest to the aircraft
position.
In some areas of the world, the KLN 90B
provides the location of the nearest point
of communication with a facility providing
information (INF) or radio (RDO) services.
(a) Select the OTH 1 page on the left
side to view two
communication with FSS. There will normally be two
TM 1-1510-218-10
NOTE
NOTE
Move the cursor
The KLN 90B stores in its
NOTE
of the nearest points of
3-57