Ending The Session - GE ImageQuant LAS 4000 User Manual

4 Operating the ImageQuant LAS 4000
4.13 Saving exposed images
Step Action
The Save dialog is displayed. Type in a File name and press the Save button to save the file.
3
No.
1
2
3
TIP:
Note:

4.14 Ending the session

This section describes how to end the current session with the ImageQuant LAS 4000. The instrument
should be switched off as described below when it will not be used for some time.
72
Description
Select where to save the file.
The file name is set automatically but may be replaced.
File names for single and programmed exposures are automatically set in the
format <FileName>_n, where n is the next available index. For images taken
in exposure type Increment, file names are automatically set in the format
<FileName>_n_N_<TotalTime>, where n is the next available index, N the total
number of exposures and TotalTime is the total exposure time for the image.
Select a file format. The .gel format is a GE Healthcare format that records
details of the exposure. Such details are not saved in .tif format.
To automatically launch an external application to view images upon saving, refer to
Launch Applicaton, on page
Special characters such as \, *, / or other characters that have a special meaning in
Windows should not be used in a file name.
98.
1
2
3
ImageQuant LAS 4000 User Manual 28-9607-42 AB