Exposing Fluorescence (Epi Illumination) - GE ImageQuant LAS 4000 User Manual

4.7 Exposing fluorescence (Epi illumination)

This section describes how to expose fluorescent samples using Epi illumination.
Ensure that the correct Epi lights and filter are installed. See
page 17.
Place a sample on the Epi tray. Put the tray into the ImageQuant LAS 4000 and close the door.
Note:
3
4
5
ImageQuant LAS 4000 User Manual 28-9607-42 AB
• Make sure that sample is suitably placed on the tray for the desired tray position.
• Ensure that a suitable method exists and that the ImageQuant LAS 4000 is properly
calibrated. See Section 4.16 Creating a new method and performing flat frame
calibration, on page
1
78.
2
4 Operating the ImageQuant LAS 4000
4.7 Exposing fluorescence (Epi illumination)
Chapter 3 Exchanging accessory parts, on
6
47