GE ImageQuant LAS 4000 User Manual page 6

1 Introduction
1.1 Important user information
Intended use
The ImageQuant LAS 4000 is a camera system that produces digital images of chemiluminescent,
dyed or fluorescent gels and membranes. The ImageQuant LAS 4000 is intended for research use only,
and shall not be used in any clinical procedures, or for diagnostic purposes.
Safety notices
The user documentation contains WARNINGS, CAUTIONS and NOTICES concerning the safe use of the
product. See definitions below.
Warnings
Cautions
Notices
Regulations and standards - supplementary
information
This equipment conforms to the regulations and standards described below.
EMC
6
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death
or serious injury. It is important not to proceed until all stated conditions are met
and clearly understood.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor
or moderate injury. It is important not to proceed until all stated conditions are met
and clearly understood.
NOTICE
NOTICE indicates instructions that must be followed to avoid damage to the product
or other equipment.
VCCI Class A Conformance
FCC Part 15B Class A
ICES-003 Class A
IEC 61326-1: 2005
EN 61326-1: 2006
ImageQuant LAS 4000 User Manual 28-9607-42 AB