Sony IPELA PCS-HG90 Operating Instructions Manual page 173

Message
A line has not been completely connected.
The far-end TV conferencing system did not
respond to our calling.
Your IP address may have been assigned to
another.
The terminal with the specified IP address
does not exist, or the system is turned off.
Call not responded.
H.245 Error.
PPPoE server admission has failed. Check
the PPPoE User Name and Password are
entered correctly.
LAN configuration error. Fixed IP for
PPPoE is set to On. Check the Fixed IP for
PPPoE is entered correctly.
PPPoE server admission fails. Dial again
after confirmation of the PPPoE settings.
Access to the DNS server has failed. Check
the PPPoE DNS settings.
Connection to the remote party via DNS
disabled. Dial using IP address.
Now obtaining an IP address via DHCP.
LAN configuration error. Unauthorized IP
address is set.
LAN configuration error. Unauthorized
network mask is set.
Cannot access the DNS server. Use the IP
address to dial.
Configure the DNS address or use the IP
address to dial.
Check the user name or user number for
dialing is correct.
The remote terminal may not be registered in
gatekeeper. Contact the gatekeeper
administrator.
Gatekeeper does not respond. Contact the
gatekeeper administrator, or use the IP
address to dial.
Meaning
Call not responded.
Check your IP address in the Launcher menu or in
the Machine information menu.
The connection to the remote party cannot be
made. You may specify a different IP address from
that of the terminal or the system of the remote
party is turned off.
The remote party does not respond to your calling.
Error occurs while connecting to the multiple
points via LAN.
LAN connection using PPPoE has failed.
Enter the correct user name and password.
This system is set to use a fixed IP for a PPPoE
connection. Enter the Fixed IP for PPPoE correctly
in the LAN Setup menu.
Check the PPPoE settings are complete in the LAN
Setup menu, then try to dial again.
Check that the PPPoE DNS settings in the LAN
Setup menu are correct.
Enter the IP address of the remote party when
dialing.
The IP address of your system is assigned
automatically by the DHCP server.
The set IP address cannot be used. Set the correct
IP address again.
The set network mask cannot be used. Set the
correct network mask again.
Connection to the remote party using the domain
name cannot be made. Enter the IP address of the
remote party for dialing.
Set the DNS address or enter the IP address of the
remote party for dialing.
Enter the user name or user number of the remote
party correctly.
Contact the gatekeeper administrator for
registration status of the remote party in gatekeeper.
Connection using the user name and user number
has failed. Contact the gatekeeper administrator, or
dial using the IP address.
On-screen Messages
173