Receiving The Broadcast Requested From Any Other Terminal - Sony IPELA PCS-HG90 Operating Instructions Manual

A Broadcast: Broadcasts the picture of the terminal connected first in the
Broadcast mode.
B Broadcast: Broadcasts the picture of the terminal connected second in
the Broadcast mode.
C Broadcast: Broadcasts the picture of the terminal connected third in the
Broadcast mode.
Stop Broadcast: Stops broadcasting in the Broadcast Mode.
To display the local picture in the Voice Activate mode
You can display the local picture only on your monitor screen while the
broadcast mode remains in Voice Activate mode.
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2
Use the V, v, B or b button to select "Near" under "Display", then press
the PUSH ENTER button.
The local picture appears on your monitor screen.
To restore the picture of the remote party
Press the FAR/NEAR button on the Remote Commander again, and select
"Far" under "Display".

Receiving the Broadcast Requested From Any Other Terminal

When you receive "Self Broadcast" command from one of the terminals
connected, the picture of that terminal is broadcast in full screen.
When you receive "Stop Broadcat" command from one of the terminals
connected, the system returns to the previous mode.
Note
If you have received "Self Broadcast" command from another terminal, the operation
above will not be carried out.
142
Using the Display Control