List Of Port Numbers Used On The Pcs-Hg90 - Sony IPELA PCS-HG90 Operating Instructions Manual

List of Port Numbers Used on
the PCS-HG90
Default
When "Port Number Used" is set to
"Default" in NAT/Port of the LAN Setup
menu, the PCS-HG90 operated as the main
terminal uses the following port numbers.
Signal Port number (N
RAS (PCS- 1719 (using Gatekeeper)
HG90)
RAS (Gate 1718 or 1719 (using
Keeper) Gatekeeper)
Q.931 (dial) Any number from 2253 to
2263
Q.931 (answer) 1720
H.245 Any number from 2253 to
2263
Audio RTP 49152+20 × (N-1)
Audio RTCP 49153+20 × (N-1)
Video RTP 49154+20 × (N-1)
Video RTCP 49155+20 × (N-1)
FECC RTP 49156+20 × (N-1)
FECC RTCP 49157+20 × (N-1)
Note
For RTP or RTCP, a port number different
from the one described in the table may be used
if the specified number cannot be used.
Custom: TCP Port Number 3000
and UDP Port Number 3100
When "Port Number Used" is set to
"Custom" in NAT/Port of the LAN Setup
menu, the PCS-HG90 uses the port numbers
defined by the values entered in "TCP Port
Number" and "UDP Port Number".
For example, when "TCP Port Number" is
set to "3000" and "UDP Port Number" is set
to "3100", the PCS-HG90 operated as the
main terminal uses the following port
numbers.
184
Specifications
Signal
RAS (PCS-
HG90)
RAS
(GateKeeper)
Q.931 (dial)
Q.931 (answer)
th
point)
H.245
Audio RTP
Audio RTCP
Video RTP
Video RTCP
FECC RTP
FECC RTCP
Auto Bandwidth Detection Port
Number
Auto Bandwidth
Detection TCP Port
Number
Auto Bandwidth
Detection UDP Port
Number
th
Port number (N point)
1719 (using Gatekeeper)
1718 or 1719 (using
Gatekeeper)
Any number from 3000 to
3010
1720
Any number from 3000 to
3010
3100+20 × (N-1)
3101+20 × (N-1)
3102+20 × (N-1)
3103+20 × (N-1)
3104+20 × (N-1)
3105+20 × (N-1)
51234 to 51235
51234 to 51235