Sony IPELA PCS-HG90 Operating Instructions Manual page 70

1
Set "PPPoE" to "On" under Page 1/2 of the PPPoE screen in the LAN
Setup menu, and enter the PPPoE user name and PPPoE password given to
you by the provider.
LAN Setup
PPPoE
Page:
2
If you have a fixed IP from the provider, set "Fixed IP for PPPoE" to "On",
and enter the IP address in "Fixed IP Address for PPPoE" under Page 2/2
of the PPPoE screen in the LAN Setup menu.
LAN Setup
PPPoE
Page:
The setting has been configured properly if the correct IP address appears in
the launcher menu.
Note
If the fixed DNS server address is specified by the provider, set "PPPoE DNS" to
"Specify", and enter the specific addresses in "Primary DNS" and "Secondary
DNS".
3
Remote parties must configure in the same way.
To connect
Select "Single" under "Dial Mode", enter the remote party's IP address, and
dial.
70
Setting Up the Network Configurations
1/2
PPPoE On
Sony@aaa.ne.jp
PPPoE User Name
PPPoE Password abcdefgh
Save
2/2
Fixed IP for PPPoE On
Fixed IP Address for PPPoE . . .
PPPoE DNS Obtain Automatically
Primary DNS . . .
Secondary DNS
. . .
Save
2005.12.28 12:34
Cancel
2005.12.28 12:34
Cancel