Using The Display Control; What Is "Broadcast Mode; Switching The Broadcast Mode - Sony IPELA PCS-HG90 Operating Instructions Manual

Using the Display Control

During a multipoint connection you can control the following operations.

What is "Broadcast Mode"?

You can use the "Voice Activate" and "Broadcast" modes.
Voice Activate mode
Detects the terminal with the speaker with the loudest voice among the
connected terminals, and displays the picture of that terminal in full screen on
all the sites. The
displayed picture also appears. The
picture is broadcast.
Broadcast mode
You can specify the terminal to display the picture of that terminal in full
screen on all the sites. The
of the displayed picture also appears. The
local picture is broadcast.

Switching the Broadcast Mode

You can change the mode broadcast during communication.
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2
Use the V, v, B or b button on the Remote Commander to select
"Broadcast Mode", then press the PUSH ENTER button.
Voice Activate: Selects the Voice Activate mode.
Self Broadcast: Broadcasts the near end (local) party in the Broadcast
mode.
indicator with alphabet showing the terminal of the
A
A
Display Control
Display
Control
Broadcast Mode
indicator is displayed while the local
indicator with alphabet showing the terminal
indicator is displayed while the
Far
Near Camera
Voice Activate
Using the Display Control
141