Setting For A Multipoint Connection; Confirming The Communication Mode Menu; Registering The Remote Parties In The Multipoint Connection List - Sony IPELA PCS-HG90 Operating Instructions Manual

Setting for a Multipoint Connection

Confirming the Communication Mode Menu

Confirm that "Multipoint Connection" is set to "Enable" on Page 1/2 of the
Communication Mode menu.
Communication Mode
Page:
Note
Multipoint connection cannot be conducted if "Multipoint Connection" is set to
"Disable".

Registering the Remote Parties in the Multipoint Connection List

You can register the multipoint connection list that includes all remote parties
for a multipoint videoconference in the Phone Book or Direct Phone Book. It
allows you to dial all the parties simultaneously.
You can enter new remote parties to register the multipoint connection list, or
add the parties registered in the Phone Book to the multipoint connection list.
To register a multipoint connection list in the Phone Book
The basic procedure for registration is the same as the registration of a remote
party for a peer-to-peer connection. This section describes the procedure for
registration in the Phone Book.
For details on the procedure, see "Registering a New Remote Party in the
Phone Book" on page 60.
132
Setting for a Multipoint Connection
1/2
Peer-to-Peer/Multipoint Common Settings
Transmission/Reception Bit Rate Common Settings
Multipoint Connection Enable
2005.12.28 12:34
Save Cancel