Inserting Batteries Into The Remote Commander - Sony IPELA PCS-HG90 Operating Instructions Manual

To attach the filter to the remote control receiver
Peel off the paper from the rear of the supplied filter and paste the filter over
the remote sensor of the remote control receiver.

Inserting Batteries into the Remote Commander

Most of the operations with the Video Communication System can be
controlled with the supplied Remote Commander.
1
Remove the battery compartment cover.
2
Insert two size AA (R6) batteries (supplied) with correct polarities into the
battery compartment.
Note
Be sure to insert the batteries
damage the insulated film covering the batteries and cause a short circuit.
22
Preparing the System
Filter (supplied)
E
side first. Inserting them forcibly
Remote sensor
e
side first may