Adjusting The Camera; Selecting The Camera To Be Controlled - Sony IPELA PCS-HG90 Operating Instructions Manual

Adjusting the Camera

You can adjust the image shot by the local camera that is sent to the remote
party to obtain the desired angle and size.
During communication you can also control the camera on the remote site to
adjust the image shot by the remote camera.
You can adjust the White balance by using the Web function.

Selecting the Camera to be Controlled

Before adjustment, choose whether you control the local or remote camera.
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2
Press the V or v button on the Remote Commander to select "Control",
then switch between "Far Camera" and "Near Camera" with the B or b
button.
Display Control
Display
Control
3
Press the PUSH ENTER button on the Remote Commander.
When "Far
indicator is displayed.
When "Near
indicator does not appear.
Notes
• To control the remote camera, set "Far End Camera Control" to "On" in the
Communication Mode menu. If this setting is not configured properly, you will
not be able to control the remote camera.
• If the local and remote parties try to control the same camera at the same time, the
camera may not operate correctly.
Far
Near Camera
Camera
" is selected (the remote camera is selected), the FAR
Camera
" is selected (the local camera is selected), the FAR
Adjusting the Camera
95