Calling A Remote Party - Sony IPELA PCS-HG90 Operating Instructions Manual

Calling a Remote Party

You can select one from among five ways how to call a remote party. Use an
appropriate way depending on your registration status.
To call a remote party by entering their number directly
Enter the remote party number.
1
Press the V, v, B or b button on the Remote Commander to select the
number input box in the launcher menu, and then the PUSH ENTER
button.
2
Enter the remote party's IP address using the number buttons on the
Remote Commander.
3
Press the V, v, B or b button to select "Dial", and then press the PUSH
ENTER button on the Remote Commander. Or press the CONNECT/
DISCONNECT (
The system begins dialing the IP address entered in step 2. "Dialing" appears
on the monitor screen.
When the system connects to the remote system, the message "Session
Connected" appears on the screen, and the ON LINE indicator stops blinking
and lights in blue.
To call a remote party by selecting them from the Detailed Dial menu.
1
Use the V, v, B or b button on the Remote Commander to select "Detailed
Dial", then press the PUSH ENTER button, or press the CONNECT/
DISCONNECT (
The Detailed
Room 10A
Room 11B
Room 01 IP:255.255.255.255
Room 12A
Number input box
/ ) button on the Remote Commander.
/ ) button on the Remote Commander.
Dial menu appears on the screen.
Starting a Communication by Calling a Remote Party
2005.12.28 12:34
Menu
Phone Book
Detailed Dial
History
Capture
Dial
Dial
81