Using A Monitor Exclusively For Local Pictures - Sony IPELA PCS-HG90 Operating Instructions Manual

Using a Monitor Exclusively for Local
Pictures
By connecting two monitors, you can use one monitor to display local pictures
only.
To connect a monitor for local pictures
Connect a monitor to the VIDEO OUT YPbPr (NEAR ONLY) connectors.
Monitor
to VIDEO OUT YPbPr
Monitor
• Enables display of the motion pictures shot by the local or remote camera.
• To switch the display between the local and remote pictures, press the FAR/
NEAR button on the Remote Commander to display the Display Control
menu, and set "Display" to "Near" or "Far".
• The display switches each time you press the DISPLAY button on the
Remote Commander.
to video inputs
Video connecting cable
(not supplied)
VIDEO IN
S-VIDEO RGB Y Pb Pr HD-SDI HD-SDI HD-SDI
2 1
SUB MAIN
CAMERA CAMERA
AUDIO IN AUDIO OUT
R MIC L R AUX 1 L R
MIC AUX 2
EC-MIC(A7) A1/A3 R L R L
1 2 1(R) 2(L)
(PLUG IN POWER)

Using a Monitor Exclusively for Local Pictures

Monitor for local picture only
Video connecting cable
(not supplied)
to VIDEO OUT YPbPr
(NEAR ONLY)
VIDEO OUT
Y Pb Pr Y Pb Pr
(NEAR ONLY)
REC OUT(MIXED)
L R L
~ AC IN
CAMERA CONTROL 100BASE-TX/
10BASE-T
(VISCA)
AUX CONTROL CTRL-S
SUB MAIN
to video inputs
115