System Connections; System Connection - Sony IPELA PCS-HG90 Operating Instructions Manual

System Connections

This section describes the typical system connections.
Caution
• Be sure to turn off all the equipment before making any connections.
• Do not connect/disconnect the BNC cable or VISCA cable with the power on. Doing so
may damage the Camera Unit or Communication Terminal.
• For safety, do not connect the 100BASE-TX/10BASE-T connector to a network that
applies an excess voltage via the 100BASE-TX/10BASE-T connector.

System Connection

Notes
• Be sure to connect the Camera Unit to the Communication Terminal using both the
BNC and VISCA cables. The picture from the camera cannot be viewed if it is directly
connected to a TV monitor.
• The REC OUT (MIXED) connectors are used to make an audio recording. These are
not used normaly.
REC OUT (MIXED) connectors
VIDEO IN
RGB Y Pb Pr
S-VIDEO HD-SDI HD-SDI HD-SDI
2 1
SUB MAIN
CAMERA CAMERA
AUDIO IN
R MIC L R AUX 1 L
MIC AUX 2
EC-MIC(A7) A1/A3 R L R L
1 2 1(R) 2(L)
(PLUG IN POWER)
VIDEO OUT
Y Pb Pr Y Pb Pr
(NEAR ONLY)
AUDIO OUT REC OUT(MIXED)
R L R L
~ AC IN
CAMERA CONTROL 100BASE-TX/
(VISCA) 10BASE-T
AUX CONTROL CTRL-S
SUB MAIN
System Connections
17