Download  Print this page

How To Use "controller; To Control The Pcs-hg90 From The On-screen Controller - SONY IPELA PCS-HG90 Operating Instructions Manual

High definition 1080i visual codec.
Hide thumbs


How to use "Controller"

To control the PCS-HG90 from the on-screen controller

When you click the [Controller] button, the on-screen control panel appears.
By clicking the buttons on this control panel, you can control the PCS-HG90,
operating the camera, registering preset camera settings, adjusting the white
balance, and so on.
For example, in order to preset and load a camera setting:
1 Set the camera at the desired position using the Camera Control buttons.
2 Click one of the "Preset Save" 1 to 6 buttons on the image.
3 The preset is done.
4 Click one of the "Preset Load" 1 to 6 buttons on the image to load it.
To adjust the white balance
You can adjust the white balance as the currently displayed subject color is
white by clicking the OPT (On Push Trigger) button of the White Balance
To switch the broadcast mode
You can switch the broadcasting picture by clicking the button of the
Broadcast Mode section.
How to use "Controller"


Table of Contents

   Related Manuals for SONY IPELA PCS-HG90

Comments to this Manuals

Symbols: 0
Latest comments: