Administrator Setup Menu - Sony IPELA PCS-HG90 Operating Instructions Manual

High definition 1080i visual codec
Hide thumbs Also See for IPELA PCS-HG90:
Table of Contents

Advertisement

GK:User Alias: Displays the user name
registered in the gatekeeper when you
use the gatekeeper.
GK:User Number: Displays the user
number registered in the gatekeeper
when you use the gatekeeper.
NAT:Address: Displays the NAT address
when you connect the system to a
network using NAT.
IP:Address: Displays the IP address.
No display: Does not display any
identification, such as the IP and SIP
numbers, for the system.
Video Input Display
On: Displays the current video input.
Off: Does not display the current video
input.
Audio Input Display
On: Displays the current audio input.
Off: Does not display the current audio
input.
Level Meter
On: Displays the audio input level.
Off: Does not display the audio input level.

Administrator Setup Menu

The Administrator Setup menu is used for
the system administrators.
The following menus appear when you
select "Administrator" on the Setup menu.
Select the desired menu.
Administrator Setup
Password
Phone Book
Other Settings
Network Quality Measurement
Password (Page 1/3)
If you have set the password with this menu,
you need to enter it when accessing the setup
menus or Phone Book menus to change the
items. Entering the password is also required
to access the Administrator Setup menu.
50
Registering Local Information
Administrator Password
Set the system administrator password (up to
8 characters). This allows the system
administrator to modify Administrator Setup
and Phone Book menu items.
Note
Be aware that setting other passwords but
leaving the system administrator password
blank allows modification and connection
without password input.
Phone Book Modification Password
Set the password used to modify the Phone
Book (up to 8 characters).
Save Settings Password
Set the password used to save settings (up to
8 characters).
Remote Access Password
Set the password to access the system
through a Web browser (up to 8 characters).
Accessing a Web browser is also enabled by
entering the administrator or superuser
password.
Password (Page 2/3)
2005.12.28 12:34
Specifies whether to require a password
when saving each setting.
Previous
Dial Setup
Enable: Need for the password when saving
the Dial Setup settings.
Administrator Setup
Password
1/3
Page:
Administrator Password
Phone Book Modification Password
Save Settings Password
Remote Access Password
Save
Administrator Setup
Password
Page:
2/3
Dial Setup
Enable
Enable
Answer Setup
Enable
Communication
Enable
Audio Setup
Enable
Video Setup
Enable
General Setup
Save
2005.12.28 12:34
Cancel
2005.12.28 12:34
Cancel

Advertisement

Table of Contents
loading

Table of Contents