Verifying The Picture Shot By The Local Camera; Receiving The Broadcast Request - Sony PCS-1600 Operating Instructions Manual

Verifying the Picture Shot by the Local Camera

You can display the local picture only on your screen in Voice
mode; the other terminals are still in Voice mode.
Press the FAR/NEAR button on the Remote Commander. The
local picture is displayed only on your screen.
To return to the Voice mode
Press the FAR/NEAR button on the Remote Commander
again.

Receiving the Broadcast Request

When you receive the command "MCV*" from the connected
terminal, the picture of that terminal is automatically broadcast.
If the meeting is held in Voice mode, the mode is canceled, and
the picture is broadcast at full-size.
When you receive the command "MCV CANCEL," the system
returns to the previous mode.
*One of the commands that is sent to the MCU from the slave
terminal.
Note
If you have received the command "MCV" from other
terminal, or you have manually selected the picture to be
broadcast, the command "MCV" is rejected.
Chapter 6 Meetings With the Upgrade Kit
123