Verifying The Picture Shot By The Local Camera; Receiving The Broadcast Request - Sony PCS-1600 Operating Instructions Manual

Verifying the Picture Shot by the Local Camera

You can only display the local picture on your screen without
changing the mode in Voice Activated mode.
Press the FAR/NEAR button on the Remote Commander, then
select Local from Display. The local picture is displayed only
on your screen.
To return to the Voice mode
Press the FAR/NEAR button on the Remote Commander
again, then select Remote from Display.

Receiving the Broadcast Request

When you receive the command "MCV"* from the connected
terminal, the picture of that terminal is automatically broadcast.
If the meeting is held in Voice mode, the mode is canceled, and
the picture is broadcast at full-size.
When you receive the command "MCV CANCEL," the system
returns to the previous mode.
*One of the commands that is sent to the MCU from the slave
terminal.
Note
If you have received the command "MCV" from other
terminal, or you have manually selected the picture to be
broadcast, the command "MCV" is rejected.
Chapter 6 Meetings With the Multipoint Function
141