Verifying The Picture Shot By The Local Camera; Receiving The Broadcast Request - Sony PCS-1500 Operating Instructions Manual

Operating Chair Controls
Verifying the Picture
Shot by the Local
Camera
You can display the local picture only
on your screen in VOICE ACTIVATE
mode; the other terminals are still in
VOICE ACTIVATE mode.
Press the DISPLAY FAR/NEAR
button on the Remote Commander.
The local picture is displayed only on
your screen.
To return to the VOICE
ACTIVATE mode
Press the DISPLAY FAR/NEAR
button on the Remote Commander
again.
Receiving the
Broadcast Request
When you receive the command
"MCV*" from the connected terminal,
the picture of that terminal is
automatically broadcast. If the
meeting is held in VOICE
ACTIVATE mode, the mode is
canceled, and the picture is broadcast
at full-size.
When you receive the command
"MCV CANCEL," the system returns
to the previous mode.
* One of the commands that is sent to
the MCU from the slave terminal.
106
Chapter 6 Meetings With the Upgrade Kit
Note
If you have received the command
"MCV" from other terminal, or you
have manually selected the picture to
be broadcast, the command "MCV" is
rejected.