Transmission - Ducati Supersport Owner's Manual

Brake master cylinder type: PR 18/21
Number of pistons: 4
REAR
With fixed drilled steel disc.
Disc diameter: 245 mm (9.6 in).
Disc thickness: 5 mm (0.2 in).
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO, floating 2-piston
calliper with cornering ABS as standard.
Rear brake type: P34e.
Friction material: TOSHIBA TT 2172 HH.
Brake master cylinder type: PS 11.
Warning
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.

Transmission

Mechanically-controlled slipper/self-servo wet
multiplate clutch.
Drive is transmitted from engine to gearbox primary
shaft via spur gears.
Front chain sprocket/clutch gearwheel ratio: 33/61.
6-speed gearbox with constant mesh gears, gear
change pedal on left side of motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
15/43.
Total gear ratios:
st
1 gear 15/37
nd
2 gear 17/30
rd
3 gear 20/28
th
4 gear 22/26
th
5 gear 23/24
th
6 gear 24/23
Drive chain from gearbox to rear wheel.
Make: Regina (520 ZRDK)
Links: 106
Important
The above gear ratios are the homologated ones
and under no circumstances must they be modified.
However, if you wish to tune up your motorcycle for
competitions or special tracks, Ducati Motor Holding
S.p.A. will be pleased to provide information about
299