Erasing stored Laps
To erase the stored LAPs, you must enter the
SETTING MENU.
Select "LAP" option, by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4).
Press buttons (1) and (2) to select "ERASE" (flashing)
and keep button (4) pressed for 2 seconds to confirm.
After 2 seconds, the instrument panel display shows:
-
"WAIT" for 2 seconds;
-
OK for 2 seconds to inform about the result of the
deletion process.
Deletion is one single command that erases all stored
laps.
When the erasing procedure is completed the
instrument panel shows "EXIT".
4
4
Fig. 87
153