If the teach-in procedure is completed correctly, the
instrument panel shows "ENDED" (A) followed by the
previous screen after a few seconds.
The rider can abort the procedure during the READY
stage by pressing button (1) for 2 seconds. In this
case the instrument panel shows "ABORT" (B)
followed by the previous screen after a few seconds.
If, on the other hand, an error or malfunction occurs
during the teach-in procedure , the instrument panel
shows "FAILED" (C) followed by the previous screen
after a few seconds.
The values shown in the pictures as required speed
range and gear are just an example and shall not be
considered as binding or corresponding to the ones
actually set for the vehicle.
A
B
C
Fig. 97
167