Table of Contents
Advertisement
Adjuster (2), located on the lever, allows a maximum
adjustment (Q) of 11 mm (0.4 in), whereas the
standard adjustment (starting one) is of 5 mm (0.2 in).
If working on such adjuster proves insufficient, work
on the secondary adjuster (3).
Warning
In case of a slipping clutch due to clutch wear,
adjuster (2) on the lever must NEVER be loosened,
but screwed, as described above.
If the clutch is still slipping, go to a Dealer or a Ducati
authorised service centre.
204
2
Q
3
Fig. 125
Fig. 126
Advertisement
Table of Contents
