DRL light mode setting
This function, active only if the DRL is available,
4
allows the user to choose the DRL status: AUTO or
MANUAL.
To set the backlighting, enter the SETTING MENU,
use buttons (1) and (2) to select "DRL" and press
button (4) to confirm.
When accessing the function, the active mode
1
2
flashes whereas the MENU and EXIT messages will
be steady on.
With buttons (1) and (2) it is possible to select the
AUTO or MANUAL level. To set the selected level,
press button (4); then the display will show "EXIT"
4
with flashing frame. To exit the menu and go back to
previous page, press button (4).
1
2
4
Fig. 80
137