Table of Contents
Advertisement
Setting the units of measurement: Temperature
This function allows you to change the units of
measurement of the temperature.
You open the "UNT" menu, as described on the
previous pages.
Select "TEMP ." option, by pressing button (1) or (2).
Once function is highlighted, press button (4).
You open the "TEMP ." menu. When you enter the
function, the current unit of measurement is
displayed flashing, followed by the list of the possible
units steady ON: °C, °F .
Press buttons (1) and (2) to highlight the units of
measurement one by one: in particular, use button (2)
to highlight the following item and button (1) to
highlight the previous item. Select the required unit of
measurement and then press button (4) to confirm
the selected unit; then the selected unit of
measurement is saved in the instrument panel and
the TEMPERATURE indication starts flashing again.
Press button (1) to make the EXIT box flash; press
button (4) to quit and go back to the previous window.
The selected unit of measurement will be used by the
instrument panel for the following indications:
158
4
1
4
2
1
2
4
2
1
2
1
Fig. 90
Advertisement
Table of Contents
