Table of Contents
Advertisement
Customising Riding Mode: Parameter
storage
After changing a Riding Mode parameter (ENGINE,
DTC, ABS, DQS), to make the change effective, it is
necessary to save it before quitting the customisation
menu.
It is possible to save the parameters set for each
riding mode.
To save the parameter settings of a Riding Mode, it is
necessary to gain access to the SETTING MENU, use
buttons (1) and (2) to select the message "R.M".
(Riding Mode) and press button (4). Then use buttons
(1) and (2) to select the riding mode to change and
press button (4). Then use buttons (1) and (2) to select
"MEM" (flashing frame) and keep button (4) pressed
for 2 seconds; then the display will show "WAIT" (for 2
other seconds) followed by "MEM-OK" to confirm that
the new parameters have been memorised.
Any parameter change made is saved and remains in
the memory also after a battery-off. If you highlight
"EXIT" and press button (4) you quit the sub-menu and
go back to previous page.
110
Warning
Changes should only be made to the
parameters by people who are experts in motorcycle
set-up; if the parameters are changed accidentally,
use the "DEFAULT" function to restore factory
settings.
Advertisement
Table of Contents
