Setting menu
This menu allows enabling, disabling and setting
some motorcycle functions.
To enter the Setting Menu it is necessary to hold
button (4) for two seconds, with Key-ON and
motorcycle actual speed ≤ (lower than or equal to) 5
km/h (3.1 mph): within this menu, it is no longer
possible to view any other function.
The Setting MENU displays the following functions:
-
RIDING MODE (R.M.)
-
PIN CODE (PIN)
-
BACK LIGHT(B.L)
-
DRL CONTROL (DRL)
-
CLOCK SETTING (CLK)
-
DATE SETTING (DAT)
-
INFO SERVICE (SRV)
-
LAP (LAP)
-
UNITS SETTING (UNT)
-
BATTERY (BAT)
-
RPM (RPM)
-
TIRE SETUP (TSU)
-
BLUETOOTH (only if the relevant control unit is
fitted) (B.T.)
104
Important
For safety reasons, it is recommended to use
this Menu with the motorcycle at a standstill.
Press buttons (1) and (2) to highlight in Menu 2 the
customisable parameters one by one: in particular,
use button (2) to display the following item and button
(1) to highlight the previous item.
After displaying the required parameter, press button
(4) to open the corresponding menu page.
If function is not available or temporarily disabled, the
menu page can not be opened.
To quit the Setting Menu you shall highlight "EXIT" and
press button (4).