Ducati Supersport Owner's Manual page 212

Gear change pedal (Supersport S)
Adjust rod (1) position by working on screw (A).
Set the gearchange pedal to the required position.
Tighten the screw (A).
Once the setting is completed, check that value (B) is
142.5 mm (5.6 in) + 0 - 5.5 mm (0.2 in).
Warning
If the travel value does not respect the indicated
parameters, repeat the adjustment operations as
described before.
A 1
Fig. 134
B
Fig. 135
211