Tire Setting
If owners install different tyres than original
equipment ones and yet belonging to the classes
specified by Ducati, this function allows them to
recalibrate the system. It also allows system correct
recalibration of all controls in case the owner changed
front and rear sprocket ratio, so that all motorcycle
control systems can consider these changes /
variants and adapt their processing parameters
accordingly.
From the Setting Menu, it is possible to start the
teach-in procedure of the new rolling circumference
and new final drive ratio or restore the default settings
as established by Ducati for original equipment outfit:
Pirelli Diablo Rosso III, front 120/70 - 17 , rear 180/55 -
17 .
To do this, you must enter the Setting Menu.
Select "TSU" option, by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4).
You open the TIRE SET-UP Menu.
Press buttons (1) and (2) to select START or DEFAULT:
the latter can be selected only if the motorcycle is
currently not set to the factory default configuration.
To exit the menu and go back to previous page, select
EXIT and press button (4).
1
4
2
Fig. 95
165