Table of Contents
Advertisement
Hazard function (4 turn indicators)
The "Hazard" function turns all four turn indicators on
at the same time to signal an emergency condition.
Push button (6) to activate the "Hazard" function.
Activation is only possible when motorcycle is ON
(i.e. when key is turned to "ON" while engine status
does not matter). When the "Hazard" function is
active, all four turn indicators blink at the same time as
well as warning lights (7) on the instrument panel. The
"Hazard" function can be disabled both with vehicle on
(key turned to "ON") and vehicle off (key turned to
OFF) by pressing button (6).
Once the "Hazard" function is activated, if vehicle is
turned off (key turned to "OFF"), the function stays
active until manually disabled by the user or for 2
hours. After 2 hours, the turn indicators switch OFF
automatically in order to save battery charge.
Note
If user performs a Key-ON while the "Hazard"
function is still active, the function will remain ON
(temporary turn indicator control interruption is
allowed during the instrument panel initial check
routine).
7
6
Fig. 116
191
Advertisement
Table of Contents
