Table of Contents
Advertisement
Trip meter 2 (TRIP 2)
1
The trip meter counts and displays the partial distance
covered by the motorcycle with the set unit of
measurement (km or mi).
The TRIP2 number (in km or miles) is displayed with
the message TRIP2 and the indication of the unit of
measurement.
When the reading exceeds the maximum value of
9999.9 km or 9999.9 mi, distance travelled is reset
and the meter automatically starts counting from 0
again.
While the trip meter is displayed, press button (1) for
2 seconds to reset TRIP 2.
The TRIP2 counter is automatically reset in case the
system unit of measurement is changed manually or
after a battery-OFF: the counter will then start back
from zero, considering the new units of
measurement.
Fig. 28
67
Advertisement
Table of Contents
