Table of Contents
Advertisement
Teach-in procedure
The teach-in procedure is allowed only at a vehicle
speed between 48 Km/h (30 mph) and 52 Km/h (32
mph) in the 2rd gear.
To start the learning procedure, select "START"
(flashing) by means of buttons (1) or (2) and then
button (4) for 2 seconds.
The display shows the rev counter scale, the current
speed, the engaged gear, "TSU" and the word
"READY" flashing.
Then, the display shows alternatively the speed range
and the gear to be maintained to allow the instrument
panel to complete the teach-in process. When the
rider complies with the required conditions of vehicle
speed and gear displayed, the instrument panel starts
the system calibration.
Fig. 96
166
Advertisement
Table of Contents
