LAP TIME
LAP function information is available when the
function is active.
After the LAP function activation from the SETTING
MENU, in the standard screen the LAP function is
available among the functions of MENU 1 and the
LAP indication is displayed.
To select the LAP function from the MENU 1, press
button (1) to scroll through the functions. The LAP
function is displayed with the indications "START" and
"LAP".
When the FLASH button (3) is pressed for the first
time, instead of the "START" indication the timer
starts with resolution of a tenth of a second
("0:00:00"). Every time the FLASH button (3) is
pressed again, the display temporarily shows the
number and time of the just-ended lap, then it will
show the timer and number of the new current lap.
Note
When the LAP function is active, the FLASH
button takes on the dual function of high beam
"FLASH" and LAP timer start / stop (new lap start
indication).
3
Fig. 32
71