Table of Contents
Advertisement
Calliper piston diameter: 32 mm (1.26 in).
Number of pistons per calliper: 4.
Front brake type: M4.32 B (4x32).
Friction material: BRM11E HH.
Brake master cylinder type: radial.
Cylinder Ø: 18 mm (0.71 in).
REAR
With fixed drilled steel disc.
Disc diameter: 265 mm (10.43 in).
Rear brake disc thickness: 6 mm (0.24 in)
Disc thickness (maximum wear): 5.4 mm (0.21 in).
Braking surface: 210 sq. cm (32.55 in
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO.
Floating 2-piston calliper, diameter 28 mm (1.10 in)
with Evo Bosch cornering function.
Friction material: TT 2182 FF.
Brake master cylinder type: PF 2x28 D.
Attention
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.
368
Downloaded from
ManualsNet.com
2
).
search engine
Transmission
Hydraulically-controlled slipper self-servo wet
multiplate clutch.
Drive is transmitted from engine to gearbox primary
shaft via spur gears.
Front chain sprocket/clutch gearwheel ratio: 33/61.
Spur gears, 1.84:1 ratio.
6-speed gearbox with constant mesh gears, gear
change pedal on left side of motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
15/43.
Gearbox output sprocket/rear chain sprocket ratio
(ROK - TWN versions): 15/40.
Total gear ratios:
st
1
gear 37/15
nd
2
gear 30/17
rd
3
gear 28/20
th
4
gear 26/22
th
5
gear 24/23
th
6
gear 23/24
Drive chain from gearbox to rear wheel.
Make: DID 525 HV3.
Links: 114.
No. of links (ROK - TWN versions): 112.
Advertisement
Table of Contents
