Table of Contents
Advertisement
To replace the high beam bulb (3), disconnect
connector (4) from the bulb holder (5).
Rotate the bulb holder of the bulb to be replaced
counter clockwise and remove it.
Replace the light bulb with a new identical one.
Upon reassembly, rotate bulb holder (5) clockwise to
block it on the headlamp cover.
Reconnect the connector (4).
Perform the same procedure to replace the low beam
bulb (2).
Note
To replace the LED parking light, contact a
Ducati authorised service centre.
264
4
5
Fig. 180
Advertisement
Table of Contents
