Table of Contents
Advertisement
LAP recording
If the LAP function is active, it is possible to record the
lap time, for a total of 30 consecutive laps.
Operation:
-
When the FLASH button (3) is pressed for the
first time, the instrument panel displays the timer
with resolution of a tenth of a second ("0:00:00");
-
the next times the FLASH button (3) is pressed,
the instrument panel displays for 5 seconds the
just-ended lap time with a resolution of a
hundredth of a second;
-
after these 5 seconds, the instrument panel goes
back to lap timer page referred to the new current
lap.
-
if motorcycle remains at standstill for over 5
seconds, lap timer is temporarily stopped and it is
displayed with the initial indication "0:00:00";
-
the next time rider pushes the FLASH button (3),
lap timer is reactivated.
If the time is never stopped, it will roll over upon
reaching 9 minutes, 59 seconds and 99 hundredths;
the lap timer starts counting from zero and will keep
running until the lap is stopped or the recording
function is disabled.
72
3
Fig. 33
Advertisement
Table of Contents
