Table of Contents
Advertisement
Displaying the stored Laps
To view the stored LAPs, you must enter the
SETTING MENU.
Select "LAP" option, by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4).
Press buttons (1) and (2) to select "DATA" (flashing)
and press button (4) to confirm.
When you enter the function, the following is
displayed:
-
the LAP number followed by letter "N" (e.g.: 01.N);
-
the recorded lap time;
-
the top speed recorded during the lap;
-
the RPM value recorded during the lap.
Press the buttons (1) and (2) to display stored LAPS
one by one; in particular: use button (2) to view the
next lap (laps are displayed in increasing order, i.e.
LAP 01 ... LAP 02 ... LAP 03 ..... LAP 30); and then
highlight EXIT; use button (1) to view the previous lap
(laps are displayed in decreasing order, i.e. LAP 30 ...
LAP 29 ... LAP 28 ....... LAP 01); and then highlight
EXIT.
To exit the menu and go back to the previous page,
select "EXIT" and press button (4).
Note
The MAX stored speed is reached during lap
(increased by 5%).
Note
If the memory is empty, the display shows the
lap timer reading "-.--.--", MAX RPM = ------ and MAX
speed = -----.
151
Advertisement
Table of Contents
