Table of Contents
Advertisement
Setting the units of measurement: Fuel
1
consumption
This function allows you to change the units of
measurement of the fuel consumption.
You open the "UNT" menu, as described on the
4
previous pages.
2
Select "CONS." option, by pressing button (1) or (2).
Once function is highlighted, press button (4). You
4
open the "CONS." menu.
When you enter the function, the current unit of
2
1
measurement is displayed flashing, followed by the
list of the possible units steady ON: L / 100km, km / L,
1
mpg (UK), mpg (USA).
2
Press buttons (1) and (2) to highlight the units of
2
1
measurement one by one: in particular, use button (2)
to highlight the following item and button (1) to
highlight the previous item.
4
Select the required unit of measurement and then
press button (4) to confirm the selected unit; then the
selected unit of measurement is saved in the
2
1
instrument panel and the "CONS." indication starts
flashing again.
Press button (1) to make the EXIT box flash; press
button (4) to quit and go back to the previous window.
Fig. 91
160
Advertisement
Table of Contents
