Refitting the battery
Important
For battery reassembly, ALWAYS contact a
Ducati Dealer or authorized Service Center.
Install the battery in the battery support and secure it
with the elastic retaining strap (19).
Attention
Connect the positive lead (20) to the positive
terminal and the negative lead (21) to the negative
terminal, as shown in the figure.
Insert the screws (22) in the terminals (20) and (21),
always starting with the positive terminal (red lead).
Attention
Position the leads (20) and (21) as shown in the
photo.
Tighten the screws (22) to a torque of 7.38 lbf-ft (10
Nm) ± 10%.
Apply grease around the battery terminal clamps to
prevent oxidation.
132
21
22
19
20
Fig 90