Residual Dangers; Hazards During Operation - Jetter JM-206-230 User Manual

JetMove 206B-230
1.3
1.3.1
Danger
Danger
Caution
Jetter AG

Residual Dangers

Hazards During Operation

HAZARD caused by high operating voltage!
Extremely hazardous voltages of up to DC 480 V occur!
Such voltages may result in muscle cramps, burns, unconsciousness, respiratory
standstill, or death.
During operation, all coverings and control cabinet doors have to be kept
closed.
Do not remove the cover.
Do not disconnect the electric connections of the servo amplifier
JetMove 206B-230 when it is live.
Do not touch the screws of the terminals X1 and X62 during
operation.
The terminals have the following meaning:
X1: AC 230 V voltage supply
X62: DC motor voltage up to 480 V
Hot surface hazard!
During operation, the surfaces, respectively the heat sinks of the digital servo
amplifier JetMove 206B-230 can heat up. The internal heat sink can reach
temperatures of up to 90 °C.
Do not touch the enclosure of the servo amplifier JetMove 206B-230
near the internal heat sink during operation and during the cooling-
off period after switching off the device.
Make sure that no temperature-sensitive parts have been connected or
fastened to the servo amplifier JetMove 206B-230.
1.3 Residual Dangers
17